Do you wish to improve your recoveries, blanks or any other parameter of your seawater preconcentration system (seaFAST)? Or are you simply curious about it? Wuttig and co-workers (2019, see reference […]
Apr / 18 / 2019
Analysis
Using ICPMS/MS to determine manganese, iron, nickel, copper, zinc, cadmium and lead concentrations on less than 40ml of seawater
Jackson and co-workers (2018, see reference below) first did a classical offline preconcentration of small seawater aliquots using a SeaFast system. More innovative is the use of a state of […]
Apr / 30 / 2018
A new method for simultaneous analysis of nickel, copper and zinc isotopes in seawater
Takano and co-workers (2017, see reference below) have developed a new method to determine nickel (Ni), copper (Cu) and zinc (Zn) isotopes in seawater. This method is very simple and […]
Apr / 18 / 2017
Onboard analysis of dissolved zinc everywhere in the open ocean with a Lab on Valve (LOV) system of the size of a bottle of wine is becoming possible
Thanks to the work of Maxime Grand and collaborators (2016, see reference below), it is now possible to analyse dissolved zinc (DZn) on board, from any kind of seawater using […]
Jun / 03 / 2016
An example of a fruitful international intercomparison
The reliability of the GEOTRACES data products including the eGEOTRACES Electronic Atlas is strongly related to the quality of the data acquired by the different laboratories contributing to this international effort. A […]
May / 19 / 2016
All mercury species measured along the GEOTRACES-UK section, South Atlantic Ocean
Total mercury (THg), methylated mercury (MeHg), and dissolved gaseous mercury (DGM) concentrations were determined along 40°S in the Atlantic Ocean. All Hg species had higher concentrations in western than in […]
May / 13 / 2016
Important warning about the uncertainties affecting results of dissolved iron concentration measurements in seawater using flow-injection with chemiluminescence detection
Flow-Injection with Chemiluminescence (FI-CL) is a procedure commonly applied in the framework of the GEOTRACES cruises because of its portability and hence suitability for shipboard deployment. Following the Guide for […]
Mar / 18 / 2016
A new method to measure lead isotopes in the ocean with an outstanding precision
A new method for the determination of seawater lead (Pb) isotope compositions and concentrations was developed, which combines and optimizes previously published protocols for the separation and isotopic analysis of […]
Mar / 06 / 2015
First results from platinum reference samples published
In Cobelo-García and co-authors work, data on platinum (Pt) concentrations in SAFe and GEOTRACES reference samples is reported for the first time. The paper also provides helpful information for those […]
Apr / 02 / 2014
Analyzing rapidly, precisely and semi-automatically lead isotopes on variable volumes of seawater (up to 1000 ml)
Zurbrick and co-authors present a relatively fast (2.5–6.5 hours), semi-automated system to extract lead (Pb) from seawater, with few chemicals yielding low blanks. They also demonstrate that subsequent Pb isotopic […]
Dec / 03 / 2013
New method for measuring simultaneously trace metal concentrations on a very small volume of seawater
An automated, on-line extraction, flow-injection inductively coupled plasma mass spectrometry (ICP-MS) method is presented by Lagerström and co-authors for simultaneous determination of manganese (Mn), iron (Fe), cobalt (Co), nickel (Ni), […]
Nov / 27 / 2013
GEOTRACES: Get the right data!
Measuring concentrations of many constituents at the nano- to picomolar levels in seawater is a difficult challenge, requiring thorough intercalibration between the different laboratories participating to the same programme. GEOTRACES is […]
Oct / 24 / 2013
Latest recommendations for successful analysis of dissolved osmium in seawater
Analysis of osmium in seawater presents complex challenges, linked to its very low (femtomolar) concentrations and multiplicity of possible oxidation states. Early insights were provided by Karl Turekian’s group at […]
Jul / 02 / 2013
Measuring precisely with only 40 ml of sample
It is now possible to measure precisely manganese (Mn), iron (Fe), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), cadmium (Cd), and lead (Pb) concentrations in seawater using only 40 […]
May / 03 / 2012